Detailed Instructions

Wi-Fi Configuration Detailed Guide

The operation of scanning the QR code displayed on the device LCD screen with a mobile phone (or Pad, same below) essentially first connects the phone to the WTHM device’s Wi-Fi network, and then relies on the phone’s automatic network detection function to redirect to the configuration page, thus completing the network configuration process.

If your mobile phone fails to redirect to the configuration page normally, please follow the detailed steps below:

1. Please confirm that your phone successfully connects to the WTHM device’s Wi-Fi network, as this is the prerequisite for the configuration process to work properly. You can check in the phone’s Settings -> WLAN configuration page whether the current Wi-Fi network name is WTHM-xxx. If not, please select one of the following operations:

   • Use the QR code scanning function on the WLAN configuration page to scan the QR code on the device LCD to complete network connection.

   • Manually select and connect to the WTHM-xxx network in the Available Networks list, password is wangkong.

2. After confirming that the phone is currently connected to the WTHM-xxx Wi-Fi network, check whether there is a prompt such as Authentication Required/Login below the network name, or whether there is a prompt such as Login to WLAN Network in the system notification bar. Click the Authentication/Login prompt to trigger the system to pop up the configuration page.

3. If the steps above still fail to trigger the system to pop up the configuration page, please manually open the System Browser, and manually enter http://192.168.100.1 in the browser’s address bar. The browser will then load and display the configuration page.

Back